Project "Evade"

[68/Camaro]

Tom is Installing and relocating Parking brake in the center side console along with cables







Now Running the Fuel Line with new clips to hold looks like it's Floating along the under carrage

[68/Camaro]

Special Thanks to Justin @ Wilwood was able to help us out to upgrade Calipers to the Six Piston
Rear






Front



Installing Brake Lines and proportioning valve

[Vegas69]

Nice work as usual. That's not a very good place for the ebracke clevis and cables. It can get pretty tight in the tunnel under hard accel.

[68/Camaro]

A Sneak peak under the LS-2 Motor and Tremic Trans kit from Keisler Engineering



Tom Finishing up Polishing the Speedtech-Stainlessworks Headers and Exhaust 3' X pipe to the mufflers and 2.5 Over the rear axle, Tom Custom cut so it would clear the Chris Alston's Rear link Suspension







Look what else came in Ring Brothers New Hood Hinges Thanks Jim!

[syclonetommy]

Originally Posted by Vegas69

Nice work as usual. That's not a very good place for the ebracke clevis and cables. It can get pretty tight in the tunnel under hard accel.

The clvis and cables will have a shrould that cover them in the top of the tunnel.

Thanks,
Tom Argue

[68/Camaro]

Tom is also finishing covering the wiring harness!

[Spiffav8]

Awesome work!

[Vegas69]

Originally Posted by syclonetommy

The clvis and cables will have a shrould that cover them in the top of the tunnel.

Thanks,
Tom Argue

Wouldn't work for me but I have mine fairly low in the back.

[tones2SS]

Car is looking good & coming along!

[68/Camaro]

Just received the replacement glass from (Flush Mount Glass System) by Classic Auto Glass Innovations! Thanks to Robert the other glass was a test fit.