We have been working on the rear spoiler. I think its turning out pretty good.
Here's a couple quick pics.(Will be a 3 piece spoiler.)
I also threw in a couple of the front splitter coming together.
I want to give a big thanks to Marquez Design. We received the new tail lights and trunk hinges.... beautiful pieces. I will post some photos of those in the next day or two.
Also a big thanks to Bullseye Power for the turbo hook up.
Here is a picture of the 408 just about ready for the turbo system to be mocked up.
Few more Blackberry pics......
We got the interior primed and sealed...then undercoated. Tomorrow i"ll lay down all the matting.
Rear spoiler is real close to being done...
Hood vents were cut and fitted. Now they are being glassed in.
Its really coming together.....
A little more update for you guys....
We have been really cranking out the body on this gal. Fitting all the body lines.. front splitter....the cabin is virtually ready to be put together. (all the primer, seam sealer, undercoating, and dyno matt is done.
Here are a couple cool pictures of the center exhaust tunnel, lower trunk floor(aka diffuser plate), im also showing how the tank will be mounted above the exhaust. There will be another floor surrounding the tank with a removable portion for easy access to the fuel lines and what not. Still plenty of room for the batteries, and sub box(to be mounted under the rear deck shelf). We stlll need to cut the original fuel filler neck off the tank... and relocate it towards the passenger side quarter. No big deal though... should be pretty tough lookin.
My seats came in as well...... awesome!!
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Linear Mode
