Aeromotive A1000 fuel pump New/BG 400 pump and lines

[indebt69]

Update: Pics are a few post down.

Aeromotive is sold. Thanks!!!

I also have the following used fuel system: a Barry Grant 400 fuel pump (pressure gauge after pump also), BG filter(very little miles) along with the housing, BG regulator(was acting screwy last time used and pressure was bounching around), -10 braided line from cell to filter, over 14' of -10 stainless braided line from pump to carb, -8 stainless braided line for return, -8 braided line from regulator to each bowl, Autometer 2 5/8 fuel gauge with braided line to run to regulator. Basically, a complete fuel system ready to run. Also have brackets to mount the pump. Jegs sells a kit just like this for $1243.99 so I'll take $725 shipped. Will be taking pics to post up.

Located in Paducah, KY (270) 556-5503, PM, or [email protected]

Thanks,
Darren

[Denvervet]

I'm interested but would like some pics.
Thx David

[indebt69]

Originally Posted by Denvervet

I'm interested but would like some pics.
Thx David

David, would you like some pics of the A1000 or the BG fuel system or both?

[Denvervet]

Both , please. I'm not familiar with the BG pump you refer to...do you have a model #? I will have to do an entire BBC setup so you have my attention.

[indebt69]

Originally Posted by Denvervet

Both , please. I'm not familiar with the BG pump you refer to...do you have a model #? I will have to do an entire BBC setup so you have my attention.

Okay, Aeromotive is for fuel injection and then the BG 400 part # 132-170001 is for a carbed motor.


http://www.jegs.com/p/Barry-Grant/Ba...46930/10002/-1

http://www.jegs.com/p/Aeromotive/Aer...50073/10002/-1

I basically have BG fuel system part # 132-170001SK1 and this was for my BBC 468.

When I get home in a few hours, pics will be posted.

Thanks.

[indebt69]

Here are some pics....the Aeromotive has been sold!!! Any questions, please ask.