Rattle Can Self Etching - Lateral-g Forums

GM Muscle · #1 08-20-2009, 03:01 PM

there are a few rattlecan 2 part primers out there that are one time use. they have a pouch in the bottom with hardener in them that you have to puncture. then shake and spray..

camaro2nv · #2 08-20-2009, 03:36 PM

Hey GM any pics of your car you can share?

68protouring454 · #3 08-20-2009, 04:55 PM

standox makes a 2 part epoxy rattle can as well, one can goes alot further then you think
its called ep pre coat

GMracer · #4 08-20-2009, 07:25 PM

thanks for the info guys!

https://lateral-g.net/forums/show...=16721&page=21
its no car, but a truck

elitecustombody · #5 08-20-2009, 11:13 PM

anything that is not catalized under filler,is a bad idea, I'm sure some old shool butchers will tell you it's fine,just hose on some lacquer primer,git'r dun, DO NOT listen to them! I'f the primer you're thinking about using does not need catalyst/hardener,find one that does

GM Muscle · #6 08-21-2009, 09:07 AM

i will second that

GMracer · #7 08-21-2009, 12:33 PM

Ok, the only reason I was even considering it was to make sure any tiny pinholes or edges had some primer in it before I spread filler. But it was more of a curiosity than anything, I'll probably let my body guys take care of it.