68 camaro no name yet

[dhutton]

You can use a plastic scraper on the roof insulation. To remove the backseat you have to push back on the bottom on both sides then up and forward. You have to push back hard.

Those floors looks quite solid to me in those pics. Hard to tell for the quarters and trunk floor but I would not rush into cutting into that car. I've seen a lot worse.

Don

[jcal87]

Originally Posted by dhutton

You can use a plastic scraper on the roof insulation. To remove the backseat you have to push back on the bottom on both sides then up and forward. You have to push back hard.

Those floors looks quite solid to me in those pics. Hard to tell for the quarters and trunk floor but I would not rush into cutting into that car. I've seen a lot worse.

Don

thanx ill try it out.The floors are pretty rough up front losts of rust holes in the passenger and driver sides trunk has rust holes as well

[jcal87]

alright back seat cushions are out did exactly what you said came right out. but what about the back side panels on the window crank area?

[tones2SS]

Keep up the great work and keep us posted.

[jcal87]

passenger side bottom inside quarter

[jcal87]

this is the driver side inside bottom quarter couldnt get as good of a shot so i took 4

[cheapta]

You think that floor needs replacing? You're not from New England are you. That looks real good to me-the whole car. I wouldn't be in too much of a hurry to cut that one up.