TKO 600 hard to shift into gears

[KEISLERGENE]

Originally Posted by Gregster1234

Hi Jeff,
I started it Sunday and it is not engaging, it tries to move a little while on jack stands, I have a lot of free play at the pedal about halfway to the floor. Do I need to adjust the pivot ball on the scattershield? If so is there a approximate setting? And I assume the trans has to be removed to do this? Newbie!

Yes the trans will need to be removed. The pedal should only have 7/8 free play.

You can try to adjust the fork pushrod before removing the bell.

The fork needs to go toward the rear of the car.