g-link vs. speed tech rear susp.

[mstennes]

Originally Posted by FreddieCougar

I wouldn't want to say that an off the shelf system would bolt in, but any reputable exhaust shop should have no problem at all getting around the suspension. There is plenty of room. I will see if I can dig up some pics.
Tim

I know from trying to help a friend out that getting clearance with the Quadri, was a nightmare. I really like the your rear suspension mounts and ease of install.

[JustinB]

I was very impressed with the Speed Tech Torque Arm setup at SEMA. So much so that I am thinking about yanking my rear setup in my 69 in favor of theirs. Good guys with a great product. Really cant go wrong with Speed Tech.

[ProdigyCustoms]

Originally Posted by mstennes

I know from trying to help a fiend out that getting clearance with the Quadri, was a nightmare. I really like the your rear suspension mounts and ease of install.

Tialpipe routing is always tricky with any link suspension. We now have pre made tailpipes for Prodigy Bar and G Link. We will be working on Torque Arm tailpipes soon.

As for Speedtech Torque Arm or G link, Tough one for me as we sell and install both along with DSE Quadra links also. Both the Speedtech and G link are non intrusive easy installs that require no cutting into the body. Both are well engineered products. About the same money. I am a long time 4 link guy, but am keeping a open mind on Torque Arms.

Here is a G Link with tailpipes we just sent home to California. Once we get the Torque Arm tailpipes done we will let you know.

We will be doing a full set of pictures soon for the website and look for a magazine feature soon