Lets see all the trucks

[COYBILT]

Im planning on a Magnacharger, new cam, and a very mild port on the heads,10.5 full floater 14 bolt swap, and just general clean up. The truck currently runs a 13.98 @ 100 flat. I want to tap 11.99 with it, but if i hit 12.50 rang I'm happy. This is a 2500 with a 4l80 and a 14 bolt so its not a light weight. I EAT IROC's with it.

[hemirambob]

Gittin ready to drop her down!

[Blue70]

My daily driver/parts hauler/tow rig

I want to paint all the chrome white and drop it a bit

[lower90xcab]

98 zq8 s10....
LtX383, TKO600, narrowed 12bolt w/ 4.10s
17x8/10 Intro Rodder 5s with 235/45 and 285/40 BFGs
13inch vette rotors/calipers up front
11inch 96impala ss rotors/calipers
5/6 drop with belltech and hotckis parts
AAMs traction bars









and a video of the truck running....

https://www.youtube.com/watch?v=0WPMeMQWHYg

[syborg tt]

Nice seeing the mini-truck love.

[Bad94]

My new DD and tow rig.



2009 2500HD 6.0L Z71, green keys, 20x10's 33x12.50x20

[mtlinvtns]

here's my daily driver, almost done. not the best picture.

[COYBILT]

I came up with the game plan


OK so here it is: L92 heads with comp springs, stock L92 truck manifold, Corvette filter for the return, Edelbrock 4 bolt 90mm throttle body (cable actuated) ,214/224 cam @.050 high 500 to low 600 lift on a 114-116 LSA, possible 6L80E trans swap , 2001 and up full floater 14 bolt with 11.5 ring gear, 2001 and up HD frame back half, and some comp lifters. I need to put more research into some parts but for the most part its factory GM parts. I am going to contact Truckin and see if they want to do a article on how to get 500+ hp out of your 99+ 6.0 vortec truck. I want to keep this truck looking stock for the most part. Since I last posted I put a ton of new parts on the truck, such as: steering wheel, rubber work mat (instead of my old carpet), new tail lights (OE), new power steering pump, hydro boost, master cylinder, steering shaft, denali Gauge cluster swap (which looks awsome),Vertical GM HD mirrors, new under hood light, new infinity speakers (stock head unit though), new tires, new coolant recovery tank, new heater core quick disconnects.

New Lq9 crate , stainless exhaust with V bands and Dynatech headers , new radiator, new hoses, new cooler lines, new motor mounts, re manufactured alternator, new steering box, new A arms ( cant get ball joints or bushings for this truck) new steering gear, rebuilt the Rear end with 4.11's/Eaton Posi, scored a set of aluminum HD wheels, new rotors and pads (Originals went 170k and still had some meat left) class 5 hitch, new 2200 stall, new O/2 sensors my own custom tune and thats about it, scored a used bed for 1k, all of this was done from April-June of 2008. I did all these improvements with some of the little spare time I had, mind you I was building the GTO at the same time.

The truck was a pest control truck my father used everyday until december of 2007, that's when I got it.

[elitecustombody]

black one from couple years back

[montanass]

my current DD-06 Duramax LT



my el camino with my old truck (03 Silverado SS before TBSS)



my TBSS (sold to buy duramax)



and my 84 K5 Blazer (this years summertime driver.... maybe)