67 Nova with Alstons front sub , wheel size?

[fesler]

Go with Drivers sizes

[HRBS]

Originally Posted by fesler

Go with Drivers sizes

Just that.... no explaination as to why ?

FYI:
225/35/18 is 24.3 tall with a 9.1" section on a 8" wide wheel.

215/40/18 is 24.7 tall with a 8.7" section on a 8" wide wheel.

Really not that much different.

[Datsbad]

thanks guys....any idea on the 7" for BS?

[NovaBlue71]

Jason, we are running a 17/7.5 fiske on frt. of Paul's chevy II. 225/45/17 tire . Joe

[JustinB]

Originally Posted by Datsbad

thanks guys....any idea on the 7" for BS?

I will send you all the BS specs we used on Jon's car tomorrow when I get in. I should also add that we ran a full Ride Tech set up and ran the car low as well.

[HRBS]

Originally Posted by Datsbad

thanks guys....any idea on the 7" for BS?

4.5"
Trust me... I'm building Nova #4.

[ssx]

I've owned 4 66'-67's and will tell you a lot depends on the ride height also. My 67' doesn't have an Alston clip (CPP subframe kit) but I'm running 18x7's up front with 215/40/18's. I adjusted the coilovers down for a slammed stance, for a car show last week and the first bump and turn I had to do, nearly took off my front wheel trim. I'm going to have to raise it up a turn or two. If the car has the wheel trim, I'd stick with a 215. An 8" will fit with the proper BS, but that much less clearance if the car is lowered. Of course Airride would solve most of this...

[crazycarl]

You could always try calling Chassisworks. I know, why would anyone want to call the people who actually make the parts they're trying to install?

You can run a 8 with 4.5" BS depending on wheel diameter.

[JustinB]

Originally Posted by HRBS

Just that.... no explaination as to why ?

FYI:
225/35/18 is 24.3 tall with a 9.1" section on a 8" wide wheel.

215/40/18 is 24.7 tall with a 8.7" section on a 8" wide wheel.

Really not that much different.

Now that I think about it I could have swore we ran a 225/40/18 on Jon's car. I will double check it tomorrow and re-post.