timing on 6.0L L92 head carburator MSD 6012

[Pantera EFI]

First, MOST IMPORTANT, make sure that you installed a
"0" mark onto your engine/front pulley/alt location is also OK.

Most often, the "standard" 60-2 target wheel/crankshaft register is off by -1.75 degrees (-=ADD).

Then when you are sure that your setting of (x) degrees is correctly "seen" by your timing verification on the MARK, proceed to tune your engine.

Myself, I would start with TWO degrees less than what you have stated.

Lance