I read somewhere that the X at the beginning of the PN denotes that it is not made by AMD. I would go w the door shells over skins since the shells seem to have better lines, esp the lower faint line on the 69.
I read somewhere that the X at the beginning of the PN denotes that it is not made by AMD. I would go w the door shells over skins since the shells seem to have better lines, esp the lower faint line on the 69.
That is correct.
__________________
69 SS396 Camaro Coupe, 4link, 12bolt posi, Speedtech LCA and UCA's, Hotchkis 2" drop springs and sway bar, Ridetech triple remote resevoir coilovers, Bilsteins, Wilwood 6 piston front/4 piston rear, Magnaflow stainless exhaust, Lemons Headers, Comp rollers/p-rods/cam, Fikse 18x8.5 and 18x10
Yes I thought I had heard the skins weren't from AMD yet - wasn't aware the tailight panel wasn't AMD either.
Have also heard the panels are in the pipeworks - Frank or Stefan do you guys have any ETA's on when the real stuff will be available?
We are hoping everyday the new doors show up. We are super close now. AMD is doing the test fitting and then we will get a set for Unfair for test fit. As rusty as that POS was the door hinge pillar and rocker jam were perfect. We did all the quarter replacement using a perfect pair of original doors so we will really know how well these work.
Yes I thought I had heard the skins weren't from AMD yet - wasn't aware the tailight panel wasn't AMD either.
Have also heard the panels are in the pipeworks - Frank or Stefan do you guys have any ETA's on when the real stuff will be available?
Just got off the phone with AMD, door shells will be out for about 6 months
__________________
Stefan B. Do what's right,not what's easy!
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Linear Mode
