Anvil Mustang

[ANVIL1]

This shot gives a better idea of the mods that were made to get the exhaust to exit out of the rockers. They had to modify the floor and go through the frame rails.

[tones2SS]

Great work guys.

[Bowtieracing]

Originally Posted by ANVIL1

This shot gives a better idea of the mods that were made to get the exhaust to exit out of the rockers. They had to modify the floor and go through the frame rails.

The exhaust is really clever Matt where are those cool cad plated suspension bolts from??

[ANVIL1]

You are digging on my gold cad plated bolts which are specially ordered from ARP, no? They are jewel like, yes? If I were the gold chain wearin' type, I would wear them around my neck and leave the top 4 buttons on my shirt undone just to show them off with my wild and crazy crispy chest hairs! The chicks, they would not be able to stand me

[ANVIL1]

This shot shows how the floor has been modified to clear the driver's side exhaust as it turns up and over the torque arm and through the rocker panel

Here's the bottom of the same area. You can also see that the cross member where the front of the arm attaches has been notched on top to allow for the oval tube exhaust to clear over it.

[tones2SS]

That's some killer work MaTT!!

[Bowtieracing]

Originally Posted by ANVIL1

You are digging on my gold cad plated bolts which are specially ordered from ARP, no? They are jewel like, yes? If I were the gold chain wearin' type, I would wear them around my neck and leave the top 4 buttons on my shirt undone just to show them off with my wild and crazy crispy chest hairs! The chicks, they would not be able to stand me

Yes ,yes!! More gold the better

[nvr2fst]

Wow Matt,
Been awhile here for me. You have taken the carbon products to the next level. Killer ride so far and the rendering looks great.

[1fine1969]

Who made the Carbon Fiber trunk lid? Reason I ask I have a 1969nova Im rebuilding an Iam searching to either find or have a Carbon Fiber trunk lid an hood made for the car. Any Ideas or tips?

[Teetoe_Jones]

Originally Posted by 1fine1969

Who made the Carbon Fiber trunk lid? Reason I ask I have a 1969nova Im rebuilding an Iam searching to either find or have a Carbon Fiber trunk lid an hood made for the car. Any Ideas or tips?

Anvil Mustang. Anvil carbon fiber products. Think really hard. Wait for it....

Wait for it....



www.anvilauto.com


We will have Mustang parts in stock and ready for sale after SEMA.

I have a 69 Nova decklid and cowl hood in stock this second ready to ship.

Tyler