69 camaro super charger ls6 t56 SKUNKWORKS

[frankv11]

a bit of progress
i finally got to roll the quarters,welded some odds and ends.cut molded and welded quarter panels to get the gap to trunk to spec. did a bit of sanding with Da. I bought some used fikse FM10 18x12 w 5.750" back space , appararently these are old school type because they dont make barrels or lips for them anymore, rears will work but fronts are 18x10 w 7.750" back space which I need 6.125". ohwell
also fabricated and welded both trunk pieces where the roll cage will atach too.

well at least I was able to set it on the floor and get an idea of how its going to look.

will post more pic having technical difficulties w down load
to view rest of pictures click on link below
http://www.cardomain.com/user/RideEd...age_id=3890030