Project 67 Nova Sedan LS1TT

[OneZero1]

Nice work! What kind of wheels are those?

[kadettcqp]

Yesterday I finally found out how to have the new doorhandles operate the actual door-mechanism. I actually thought I had figured this out several months ago, but when I was about to go by that route and fabricate the stuff needed I realized that if I did it that way you would be able to open the door even though it was locked.

But then yesterday the solution finally emerged and I made it work. This means that one more corner-stone is carved since I now for the first time since I bought the car, can get in using functional door-handles.

Originally Posted by 70rs

Keep at it. Its going to be a really cool car all finished.
Sorry to see that engine damage.

Thanks, I finally think I am on my way to actually have this car driving this year.

Originally Posted by OneZero1

Nice work! What kind of wheels are those?

They are Rondell 58, they are used a lot on 5-series BMW's from the late 90's - early 2000's. These are 8.5x17 front and 10x17 rear.

[kadettcqp]

It is not that much visual that has changed during the last week or so. This weekend was almost entirely spent on welding the tunnel, floor, subframe connectors etc. that until now had only been tack-welded. I spent the entire saturday and much of sunday only welding. But as it always happens when you cover good ground on a sunday - something either brakes or runs out - this time i ran out of wire for the MIG.



Then I could start to look at wirering for the LS1.





Gathered a bit of motivation on a racetrack in the neighbor-country Sweden last Wednesday. Of course I could not run either of my cars, so the bike had a go.

[70rs]

Originally Posted by kadettcqp

It is not that much visual that has changed during the last week or so. This weekend was almost entirely spent on welding the tunnel, floor, subframe connectors etc. that until now had only been tack-welded. I spent the entire saturday and much of sunday only welding. But as it always happens when you cover good ground on a sunday - something either brakes or runs out - this time i ran out of wire for the MIG.



Then I could start to look at wirering for the LS1.





Gathered a bit of motivation on a racetrack in the neighbor-country Sweden last Wednesday. Of course I could not run either of my cars, so the bike had a go.

Two wheeled therapy...my kind of fun! Two recent bikes are a '03 CBR 1100xx (Blackbird) and a '06 ZX636.

[kadettcqp]

Originally Posted by 70rs

Two wheeled therapy...my kind of fun! Two recent bikes are a '03 CBR 1100xx (Blackbird) and a '06 ZX636.

Nice bikes! Do you still have the 636? Oh yes it is really nice therapy, love riding bikes as well! Not always both wheels stays on the ground - but hey I always come home with a big smile on my face.