Previously a finned radiator style transmission cooler was installed in front of the radiator and A/C condensor.
Utilizing these finned coolers and mounting away from the radiator dropped 20° off the engine temp.
Here's a couple pics of the bench the bumper is on. Two 2x4's are attached to lengths of conduit that slide under the top.
Pulling out allows you to put a 4x8 sheet of plywood or whatever on the bench. The overlapping pull out supports act like saw horses to support the sheet you are cutting through. Attach casters to the legs so you can roll outside or wherever.
Don't set the saw too deep though. 1st time I used it I nic'd the conduit with the blade
syborg tt: Talk about detail, your truck is full of it! Do you have another project in the works?
Thank you - we lost control on that project. Currently I am working on a 70 Camaro. Not going as crazy on this project. The plan is to drive this one or at least keep it and give it to my girls when they turn 16.
__________________ marty-mj
Is a car ever really done???? It's like a ball of yarn unwinding, that has no end... Author DKz Garage
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
It's like a ball of yarn unwinding, that has no end... Author DKz Garage
Hybrid Mode
