sound deadening

[FlameBroiled]

Lizzard skin works pretty damn good!!!
Our last five projects have recieved it.

[Nikwho]

I am doing a combination of above. I am using U-Pol Raptor liner under the car. The inside of the floor has recieved POR-15, followed by a DupliColor roll on bed liner, that will be covered by DynaMat, carpet padding and then finally carpet. I am also using DynaMat on the inside of the doors, toe boards, package tray and on the roof before installing the headliner. Up higher on the inside of the firewall I am using the stuff mention above from Lowes because its super flexible and easy to install over the curves and around stuff. plus its cheap.

[Lenie]

I applied raptor by U-pol about 5 years ago under the car, on the floorboard and in the trunk. Pretty easy to apply. Then I went with Fatmat off ebay on the floorboards and trunk then spent alittle more on a upper grade of Fatmat for firewall, inner fender, roof and inner doors. Installed it on my son's car, has held up very well and sounds very good inside the car so figured it would be good enough for mine. Satisfied and the Fatmats quite a bit cheaper than the Dynamat. Good luck.

[ItDoRun]

Originally Posted by Lenie

I applied raptor by U-pol about 5 years ago under the car, on the floorboard and in the trunk. Pretty easy to apply. Then I went with Fatmat off ebay on the floorboards and trunk then spent alittle more on a upper grade of Fatmat for firewall, inner fender, roof and inner doors. Installed it on my son's car, has held up very well and sounds very good inside the car so figured it would be good enough for mine. Satisfied and the Fatmats quite a bit cheaper than the Dynamat. Good luck.

What's the "upper grade" of Fatmat you mentioned. I was about to buy one of their 100 sq. ft. rolls for the interior of my car but didn't see any different grades.

[Lenie]

Originally Posted by ItDoRun

What's the "upper grade" of Fatmat you mentioned. I was about to buy one of their 100 sq. ft. rolls for the interior of my car but didn't see any different grades.

Here's what I used. Was very good to work with and seems to be a good product.
http://cgi.ebay.com/100-New-FatMat-M...aultDomainQ5f0

[nacnac]

How well does that raptor stuff lay? Anyone have any 'after' pics? I'm looking to use that under the car and the wheel wells, then lizard skin inside. Am i on the right track?

[youthpastor]

Originally Posted by Lenie

I applied raptor by U-pol about 5 years ago under the car, on the floorboard and in the trunk. Pretty easy to apply. Then I went with Fatmat off ebay on the floorboards and trunk then spent alittle more on a upper grade of Fatmat for firewall, inner fender, roof and inner doors. Installed it on my son's car, has held up very well and sounds very good inside the car so figured it would be good enough for mine. Satisfied and the Fatmats quite a bit cheaper than the Dynamat. Good luck.

Yep that's what I do. Put about 50 psi at the gun for the Upol an dit lays down really nice. Fatmat $139 Ebay to do a whole car! This stull like to be warm to work with, heat the garage.

The Upol is so durable that the local school bus garage uses it to coat those ugly green seats!