Finally made it to the track

[Big-Head]

Nice! You get the 60' down in the 1.50 range, it will go mid/low 11's @ 118-120.

[6D9]

With a decent hook will go 11.7-11.8 range with the 114 trap speed. Whats the motor combo??

[JMitch19]

Originally Posted by 6D9

With a decent hook will go 11.7-11.8 range with the 114 trap speed. Whats the motor combo??

It is pretty much a cam only(228/232 .588 .574 on a 112) LQ9 short block and T56. It has an LS6 intake,comp 918 springs, ported throttle body,hooker 1 3/4 headers,and 3 inch exhaust. It dyno'd at 400rwhp 380rwtq on a dynojet with the stock 10 bolt and 4.11's. It has a Moser 12 with 3.73's in it now. The Moser was ordered with 4.11's, but it came with 3.73's... I'm shifting into 4th after the 1000 foot mark and only crossing the line at 5400 rpms.

I picked up two 04-06 GTO spare wheels to use for skinny on the front and I'm looking for some cheap rear wheels to throw drag radials on. It seems a lot of the vette guys are using these GTO spares. They are a 17x4 cast aluminum 5 spoke wheel that looks pretty good and more importantly they clear most bigger brake set ups.

It was 76 and really humid here yesterday. I'm hoping with some cooler weather and some good tires it will go 11.99 or better.

[6D9]

Nice runing set up! Runs very similar to my old combo(sbc). It went a best of 11.82 at 115.8. This was with a crappy 1.81 60 foot time.