G-machine of a different.......scale?!?

[black2002ls]

awesome looking builds. What I have finished thus far aren't quite of that calibre!

[G-Body]

Thanks hers a few more hope yo umight like

a 56 chevy 2-10 with a viper motor and 6 speed custom chassis etc
and a well started out as a 40 Ford delivery and it has a willys frt end sb2 motor with fuel injection etc prowler seats over 65 mods on car pro streeted thanks again later let me knwo what you think

[black2002ls]

I managed to get 5 good casts from my mold for the wheel. No pictures yet, I might have one this morning. As bad as it is to say this, it was qute surprising when the wedges fit together perfectly. I was expecting some sort of trouble with them. It is taking me a little while, as I am just casting the peices whenever I get a chance. Usually not more than 2 in a day. So it will take me quite a while to get enough peices to create the wheel.

[black2002ls]

Here ya go! I laid it out on a piece of masking tape so that the sections would hold together while I checked fit. One of the sections has not been cleaned up yet, as there is still a film of resin in the opening. Enjoy.