Thanks Jon!! I think recessing the sub is a great idea. Not only will we be able to keep travel, we will also lower center of gravity. Dropping everything will be easy. Steering coloumn will have to be raised a bit at firewall and z-bar lowered and modified but its definitely doable. The interior sheet metal work will be the brunt of the work.
Don't forget the core support Gae. 'The floor channeling guys' seem to mod that every time...
Don't forget the core support Gae. 'The floor channeling guys' seem to mod that every time...
Yup, raise the supports at the radiator core, drop the side frame mounts, and modify the rear mounts. Cut and rebox a portion of the body where frame meets firewall, inner wheel wells will need to be cut where they sit above the frame. Front bumper brackets removed and modified.
__________________ Gaetano Cosentino
Last edited by Track Junky; 12-22-2011 at 03:09 PM.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
