wheel fitment c10

[DriverzInc]

C10's are one of my favorite trucks, and I am building an air bagged one right now, with a 383 stroker motor.

Send me an email or PM, I would love to help you out with wheels and tires.
[email protected]

Travis

[SWAPMEETCRAZY]

Travis may fit u with a set of these--driver inc special!...Schott's Mod 5's ...Slickest billet I've seen ...bought from Jon before change but Travis hasn't missed a beat from what I've seen!!.........jim

[okyankee]

Originally Posted by SWAPMEETCRAZY

Travis may fit u with a set of these--driver inc special!...Schott's Mod 5's ...Slickest billet I've seen ...bought from Jon before change but Travis hasn't missed a beat from what I've seen!!.........jim

how big are the wheels and tires? stock frame?

[SWAPMEETCRAZY]

Originally Posted by okyankee

how big are the wheels and tires? stock frame?

frame--not quite stock!-P.B dropmember
wheels--20x12----315/35/20

[DriverzInc]

Thanks Jim!

Your truck looks absolutely awesome, and love the way that Schott wheel tucks in that picture. Mod5 is one of my favorite wheels from them.

Note:
We just became a Porterbuilt dealer!

[SWAPMEETCRAZY]

Originally Posted by DriverzInc

Thanks Jim!

Your truck looks absolutely awesome, and love the way that Schott wheel tucks in that picture. Mod5 is one of my favorite wheels from them.

Note:
We just became a Porterbuilt dealer!

That was money shot when I was measuring for moser rear--some of the finest billet I've seen-Now your double on my list with PB products!!....Nate definitely has his S##@ together !! Anytime U need some pics or a tutorial on PB let me know--Be glad to help--Can't wait till it's on the road......Wait let me show u how good it looks even upside down!...lol...........jim

[DriverzInc]

Just as good as it does from the top side. I will have to keep posted on your build, for sure. Let me know if you need anything else.

Might take you up on the offer when I add porterbuilt to the site... might need some extra images.

[okyankee]

Originally Posted by SWAPMEETCRAZY

frame--not quite stock!-P.B dropmember
wheels--20x12----315/35/20

nice frame. i read on 67-72 site that 20x12 with 7" bs will fit the stock frame with making the wheel tubs bigger and the frame stock. do you know if that is correct. thanks for the help. i got my 67 finally and need some info befor tear down.

[SWAPMEETCRAZY]

Originally Posted by okyankee

nice frame. i read on 67-72 site that 20x12 with 7" bs will fit the stock frame with making the wheel tubs bigger and the frame stock. do you know if that is correct. thanks for the help. i got my 67 finally and need some info befor tear down.

Stock frame -no problem--mine is stock width--with the inboard bags like mine U can actually fit a 15" wide wheel--tubs a different story--May be possible on your example but I have never checked that to be honest--I like mine LOW so tub has to be moded anyway......let me know if I can help...not an expert but have done lots of these trucks...........jim

[usa-69z]

Originally Posted by DriverzInc

C10's are one of my favorite trucks, and I am building an air bagged one right now, with a 383 stroker motor.

Send me an email or PM, I would love to help you out with wheels and tires.
[email protected]

Travis

Thanx travis,, i have sent a pm regarding an order i have in now.. My new 70 stepside truck arrives tonite fresh off the ship from the US ,, so not sure what ive got yet..I beleive there are different diff lengths and 5 and 6 stud hubs..Ill post some pics when she settles in the garage. Dont know much about these things (yet)



cheers, Gav