Body mount bushings 1st gen camaro

[randy]

Originally Posted by Ron in SoCal

Possibly inner fender clearance depending on how low you go, tire size and how much suspension travel you have...

what about the way the fender lines up with the door? I will be moding the inner fenders for max clearance anyway so that doesnt matter. I didnt buy the DSE front subframe and rear quadralink for the car to sit high. I want it low and to perform to the max

[Rick D]

Randy, fenders bolt to the body not the sub frame so they will line find with the doors.

Originally Posted by randy

what about the way the fender lines up with the door? I will be moding the inner fenders for max clearance anyway so that doesnt matter. I didnt buy the DSE front subframe and rear quadralink for the car to sit high. I want it low and to perform to the max

[Ron in SoCal]

Originally Posted by badrs69

Randy, fenders bolt to the body not the sub frame so they will line find with the doors.

^ Listen to this guy. He's done it once or twice...

The bushings also mount to the core support and that supports the fenders, but the manufacturers have that height measurement down so as Rick said you'll be OK.

Edit: Unless you're going for the slammed look, the DSE sub and Qlink will get you nice and low.