67 Camaro - Dad and Son build

[waynieZ]

I like it too. It should be sweet!

[boostin05blacks]

Thanks for all the kind words guys. Wiring is not my strong suit and sometimes I step back and look and become overwhelmed at the wiring as a whole. Me and the old man have been tackling it one piece at a time, man it is a lot. I just keep thinking of the time Ill finally get to turn the key.. Last weekend me and the old man got my brother and 3 other guys to come over to really tackle this thing. The good news is that the front headlight harness, the vaporworx harness (w/ the exception of the power feed wire), and the engine/ecu wiring is done (w/ the exception of the 6-7 leads inside, power to the fuel pump, alternator power wire, and a couple sensor that need to be addressed). What is left is what was mentioned above, the Mad electrical stuff, and the AAW engine side of the firewall, finish the battery hook up, wiring to the starter, and finish some dash wiring. So still plenty left..but we are getting there. I’m trying to do it once the correct way instead of rushing and having to go back.

In other news Timmy is making progress on the gauge cluster and has to come back over for one last fit before he can put his final touches on it. It’s coming out great and I'm glad this is the route that we went. I got 4 small led lights from classic dash to have them wired into the stock dash cluster for turn signals, high beams, and brakes or check engine light so that will be soon. Now that the fuel stuff is all wired I plan on having Timmy also make a small panel to hold the pump, fuse..ect. It will be located right near the battery.


Onto some pictures from the past 2 weeks.











and the future car owner testing out his seat...

[INJECTED69]

Looking good!!!

[Al Moreno]

Looks like the little guys is practicing holding on for dear life Keep up the great work!

[boostin05blacks]

Thanks guys...

So last night I took off from working on the car to spend some time with the family. I brought home a little clean project to work on while watching TV before bed. I’m still figuring out how I want the coils /spark plug wires to run. Id really like them to run under the headers and mount the coils to the frame in front of the motor out of sight. With that being said I know that heat is going to be the biggest problem. I bought some DEI heat shield for the wires that is rated to 500 degrees. I also have the end boots that are rated to over 1200 degrees. Between the two I think they should be fine... So I took apart the wires and ran the DEI sleeves over each one. Here are some pictures..

[waynieZ]

They look good. I was thinking of the boots for the ends. Nice job.

[boostin05blacks]

Thanks man, Yea they came out really nice. Hopefully I can tuck them under the headers nicely without and problems. Well see..

Got over to the car this weekend for a bit while the baby was napping. Still plugging away at the wiring. Not to much left really. Have to finish the wiring for the tach and water gauge , the 6-7 wires for the ecu, run the power for the fuel pump, put in two more main grounds, wire up the radiator/fans, run a power from the alternator to the main power connection, and run a power for the interior wiring to the main power connection. Actually looking at it wrote out it is enough. Soon enough. Mike and I ran the main power block to the drivers fender so I can get to it but it's out of the way enough that there should be no problems with anything else coming in contact with it. Extended the main power wire for the ecu to that and put the fuseable links in, also finished running the main power wire from the battery to it. Today I had some time so I drilled a hole in the floorboard for the pass thru connector. Mounted that and cut the main 1 gauge to size and finished crimping the ends. Also made the main wire to go from the connector on the engine bay side to the starter. In other news the radiator has been ordered and should be here soon. Also ordered a maf sensor so that should wrap up the ecu potion of wiring.

On Saturday the brake lines came in from inline tube. Seems like a really nice kit. Ordered all stainless and when I opened it I was scratching my head a bit as there was 8 lines. I though there was 7 lines for the brakes. Two smalll lines off the master to a distribution block right under the master cylinder. From the distribution block three lines come off that, one to the front right, one to the front left, and one long one to the rear that stops right before the rear axles which goes to a soft line. From the soft line to a "T" mounted on the rear axle which connects to a rear left and rear right line. 7 total. Anyone wanna guide me or tell me what I'm missing? Onto the pictures...