detroit speed & engineering

[Flash68]

Originally Posted by chr2002ca

You could try wrapping the carrier in several layers of Dynamat. It worked great on the whining noise my first wife made.

That's a winner.

[coolwelder62]

If the gear set is whinning when power is on,& no noise when off the throttle this is an indication it's time for a new ring & pinion.

[FETorino]

Its time to change the oil anyway swap to Lucas 85 / 140.

If that and some more break in miles isn't quiet enough plan B.

Originally Posted by chr2002ca

You could try wrapping the carrier in several layers of Dynamat. It worked great on the whining noise my first wife made.

[hulsund]

Originally Posted by coolwelder62

If the gear set is whinning when power is on,& no noise when off the throttle this is an indication it's time for a new ring & pinion.

Is whinning when i cruising on the higway ,will try to change oil and use 80-140

[Vegas69]

Since when should properly set up gears whine? I've never heard a peep out of mine. Of course, my cars not a kitten either.

[Matt@BOS]

Originally Posted by Vegas69

Since when should properly set up gears whine? I've never heard a peep out of mine. Of course, my cars not a kitten either.

Yeah, but even if it did, we certainly wouldn't been able to hear it over the whining about brake pad knock back, or valve lash, or whatever else has to get changed out on big blocks frequently

Matt

[Flash68]

Originally Posted by ratman67

you must be running a pansy exhaust system if you can hear anything other than the engine...put some free flowing mufflers on the car, then buy a mans sound system and let her rip, problem solved....

Originally Posted by Vegas69

Since when should properly set up gears whine? I've never heard a peep out of mine. Of course, my cars not a kitten either.

Did I read/hear that 9 inchers are more prone to this noise than 12 bolts? Thought I did....

[Vegas69]

Originally Posted by Matt.A

Yeah, but even if it did, we certainly wouldn't been able to hear it over the whining about brake pad knock back, or valve lash, or whatever else has to get changed out on big blocks frequently

Matt

Don't change the subject.

Originally Posted by Flash68

Did I read/hear that 9 inchers are more prone to this noise than 12 bolts? Thought I did....

I was wondering the same thing.

[Matt@BOS]

Alright, so I've never actually heard mine make a whining noise. However, I have heard it make a popping/clanking noise once or twice when pulling away from a stomp, same goes for Bad Penny. A little disconcerting but they're still going strong.

Matt

[sixnina]

Originally Posted by Flash68

Did I read/hear that 9 inchers are more prone to this noise than 12 bolts? Thought I did....

What do you expect when you put a ford under a Chevy?