2nd Chance Camaro - Let the Project Begin

[chr2002ca]

Great looking custom setup. Makes me want to go back and clean up my mig welds.

[syborg tt]

Originally Posted by chr2002ca

Great looking custom setup. Makes me want to go back and clean up my mig welds.

Thank you

The goal is to use as many bolt on parts as possible. In the case of the exahust we used and existing 2nd gen kit and made it fit better. This set up is about 1/4 the cost building a complete custom exahust including headers

[cencalc6]

Awesome job on the exhaust system

[syborg tt]

Originally Posted by cencalc6

Awesome job on the exhaust system

thank you

[syborg tt]

2nd Chance Camaro - Flaming River Steering Shaft

2012 11-15 Update - Flaming River Steering Shaft
www.2ndchancecamaro.com

Afternoon All

The stock steering shaft was ugly and I couldn't stand looking it. So a quick call to the guys are Flaming
Rivers and the new Stainless Steel steering shaft & universal joints were on the way. I know I could have
bought it direct from Summit Racing but they didn't have the lower universal in stock.

And yes I have a new rebuilt stock steering column sitting in a box.



I put the Universal joints on both ends. Slipped the shaft into the gear box side and marked the shaft
were it needed to be cut.



Little more then an inch needs to come off.




Really it's straight - Honest !!



Installation is complete. Total time 45 minutes.


Parts List
FR2512DDPL 48 Spline 3/4" DD Polished $99.95

FR1850SSPL Stainless Steel DD Shaft Polished $85.95

FR2533DDPL 30 Spline 3/4" DD Polished $101.95

Pictures hosted by www.garagescene.net

[coolwelder62]

[Rick D]

Looking good Marty!!

How are you doing?? Are you going to show this weekend??