Dodge Charger 500 -70, 6.1 Hemi + manual, Pro-touring project

[MikkoV]

Thansk to Rjsjea for tips, what read yeasterday, i understood also that those headers fit, that saves quite a lot.

Originally Posted by Grimmey71

I am also doing the cherokee 6.1 into my Cuda, curious what stand alone system your using? Also I have started to track down a list of parts for my swap

Future parts:
Fram oil filter #ph3512(w/o relocation kit)
Rear heater hoses, pn68000978AA, PN68000979AA,
Upper radiator hose pn5290488AB
Milodon#31000,

Not sure where I got all the info from but I have been writing it down as I read through various builds.

Thanks

So does that filter fit with original adapter? I´ll need adapter anyway, my engine is from wrecked car and adapter is damaged. Think that i´ll get this one.
http://www.moparsupercenter.com/gen-...45fltrkit.html

I ordered Milodon pan and pick-up from Summit, my usual part suplier gets stuff from there couplse times a month

I´ll be using Finnish ecu called http://tatech.fi/index.php i´ve put that earlier to two cars and are familiar with that, i´m also running LS3 in my Camaro with that.