5 Years Later - It's Not a "new" Project, And Not a New Member Anymore!!! - Lateral-g Forums

**syborg tt** · #1 05-09-2006, 02:25 PM

Quick Update - The new gallery is up

http://www.syborgtwinturbo.com/gallery/Build

it has all of the pics of the build so far in a chronological order

**syborg tt** · #2 05-11-2006, 09:40 AM

Okay Played with the Gauges again last night. Man am i having fun.

I like this one the most

TravisB · #3 05-11-2006, 09:47 AM

I vote for the very bottom one!

**syborg tt** · #4 05-19-2006, 11:11 PM

Well, looks like Dave got a bunch of work done this week.

There is a lot more room in the new dash housing then we thought.
I've got a bunch of playing with the dash to get it to look just like I want it but I like this one the most so far.

Side view doesn't look to busy does it.
I can't wait to send the dash to Tom at Hydro Illusions
(( www.hydroillusions.com )) to have him make it look like carbon fiber.
Did you notice the notch in the floor for the exhaust.

Now that we have the steering column back in.
Dave was able to complete the D-Side downpipe.
It has the same feel / flow as the P-Side.

Just a quick shot of the downpipe and Mike Lee's Headers (( www.raceprovenmotors.com ))
Mike does some really nice work if your looking for a really good guy.

**syborg tt** · #5 05-19-2006, 11:11 PM

It looks like the Master's are far away from the heat but we may make a heat shield just in case.
Did I mention that these are going to be swapped out for Billet one's?

The exhaust is joined again for the last time on both sides.
Dave still has to run the wastegate dumps back into the downpipes.

In order to gain the needed clearance around the intercooler
Dave reworked the lower portion of the core support.

Trying to keep the same theme in the build. We did dual Rails similar to the back half.

**syborg tt** · #6 05-19-2006, 11:12 PM

Here is my one of my favorite shots. Looking down into the engine bay.
I think it looks so much cleaner then before. We also gained the needed inner fender clearance.

Before picture -- just in case you forgot.

Okay I just thought it was a cool picture.
Cough - Cough MSD & Autometer sure would be nice sponsors on this project.

**syborg tt** · #7 05-19-2006, 11:12 PM

Just playing around again with camera angle's.

Wait -- Look up you can see the trans pan from Bowler Transmissions (( www.bowlertransmissions.com )).

Wow look at that MSD and Autometer again.......

That's it for this week more to come next week.