EFI stainless steel hardline project

[eamblk50]

I set the braided system up on advise from Aeromotive years ago. Its a 10 feed and 8 return, would this equate to 5/8 and 1/2 hardline? Magnafuel recommends the same -10 feed and-8 return for my combo in ss braided. Are size requirements less for hardline??

Originally Posted by INTMD8

Fair enough but fwiw I've made 1100+rwhp on several occasions with efi and a 3/8 feed line.

I wouldn't bother trying to fit a 5/8 feed with EFI unless I was aiming for 3000+hp.

Understood if you don't want to change it but just thought I would mention that it's way overkill.