Help!!! Stance Chevelle 20 all around - Lateral-g Forums

jay71velle · #1 03-16-2013, 10:30 PM

Ok guys I'm running 20's all 4 corners started with 245/35/20 295/30/20 Toyo, swapped rear tires today to 295/35/20 pilot....currently I have cpp 2" drop springs in rear and cut one coil in front, not sure if I want to cut some more or run drop spindles in front....

jay71velle · #2 03-16-2013, 10:42 PM

295/30/20 in the rear

gearheads78 · #3 03-16-2013, 10:48 PM

Not a big fan of 20's on a mid size car but if I was running that combo it needs about 1" more in back and 2-2.5" in front

jay71velle · #4 03-16-2013, 11:48 PM

Yea that's what I was thinking, I actually just dropped down from a 22 so I'm gong thru withdrawal....young guy but I'm trying to go in the right direction

JB64CHEVELLE · #5 03-17-2013, 10:27 AM

My vote would be to bring it down some more. I think you need to tuck the tire a bit in the wheelwell . I would come down at least 1.5".

**214Chevy** · #6 03-17-2013, 12:29 PM

I agree, it needs to come down about another inch in the rear. I have a 72 Chevelle and run 20's on all for corners. Here are a few pics of my ride height. I wanted the ledge of the fender to go past the top of the wheel a little bit. Me personally, I like the 20 on our cars....at least a 19" anyway. I think our cars are too big for 17's and 18's.

jay71velle · #7 03-25-2013, 08:46 PM

Hey thanks guys...it will be coming down an inch in the rear for sure...and maybe 2 in the front...@ Marcus im keeping my eye on your setup, I only hope part II of my build could be as good as yours

**214Chevy** · #8 03-26-2013, 10:00 AM

Quote:

Originally Posted by jay71velle

Hey thanks guys...it will be coming down an inch in the rear for sure...and maybe 2 in the front...@ Marcus im keeping my eye on your setup, I only hope part II of my build could be as good as yours

Thanks for the compliment bro. Take your time and do it right. Funny you mentioned "part II" because this is my 2nd rebuild as well.

jay71velle · #9 04-04-2013, 08:57 AM

dropped the front almost 2" this past weekend, think i dropped it to much but it might grow on me....just looks funny with the engine being that close to the ground

gearheads78 · #10 04-04-2013, 09:20 AM

Quote:

Originally Posted by jay71velle

dropped the front almost 2" this past weekend, think i dropped it to much but it might grow on me....just looks funny with the engine being that close to the ground

Now its just right IMO