...

Go Back   Lateral-g Forums > Technical Discussions > Paint and Body
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 05-23-2006, 11:12 PM
Jerebus67 Jerebus67 is offline
Member
 
Join Date: Dec 2004
Posts: 96
Thanks: 0
Thanked 0 Times in 0 Posts
Default Huge price difference charged from what quoted

Need some help. I brought my 67 camaro convertible to a guy in October of last year and he quoted me 8500 for a color change from Red to Black. No major body work needed. I put an SS hood on it, front and rear spoiler and we ended up putting a new trunk lid on it. A buddy and I took the engine off the frame and powdercoated the frame and core support and reassembled it and brought it back to him so he really didnt do the frame off. He said there was some rust he had to fix on the firewall and a little repair to the dash. I have paid him 9500 so far on it and now he says he needs 3300 more due to the fact he has more hours into that he thought he would. This 3300 is for some of the powercoating and parts he had to buy and the extra labor hours. I am an idiot and didnt get the first quote in writing. He has been a good guy but I think that 4300 more than the first estimate is a pretty good chunk. First of all he said he should have it done by April 1st and now with it being MAy 23rd he is asking for 4300 over what he quoted. Any suggestions??? Pics of the process!

http://s38.photobucket.com/albums/e143/jerebus67/?sc=1

Is 12800 crazy for a perfect paint job??
__________________
My 67 Convertible!
ZZ4, DSE front rear and minitub

http://photobucket.com/albums/e143/jerebus67/?sc=1
Reply With Quote
  #2  
Old 05-24-2006, 07:45 AM
XcYZ's Avatar
XcYZ XcYZ is offline
Administrator
 
Join Date: Jun 2004
Location: Rochester, Minnesota
Posts: 8,998
Thanks: 0
Thanked 0 Times in 0 Posts
Default

It's going to be a great looking car.
__________________
Scott

My LS7 69 Camaro
Reply With Quote
  #3  
Old 05-24-2006, 10:27 AM
TravisB TravisB is offline
Senior Member
 
Join Date: May 2005
Location: NW arkansas
Posts: 1,472
Thanks: 0
Thanked 1 Time in 1 Post
Default

12,800 is reasonable if it is perfect...........I have seen much higher for perfect paint jobs. I would make sure that you go over it again and again though and find every flaw for the kind of cash
__________________
Kenny Davis Hot Rods
Reply With Quote
  #4  
Old 05-24-2006, 10:31 AM
mazspeed's Avatar
mazspeed mazspeed is offline
Senior Member
 
Join Date: Jul 2005
Location: Campbell Ca
Posts: 2,005
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I had kind of the same problem with my painter, it took too long, and it cost another $1500 more, but I know he did more work then he said he would have too. Body work is a funny thing, it may look straight, and seem ok, but there is an awful lot of blood sweat and tears that go into a job like that. If your car turns out great, then no problem, but if you find flaws, then you have a reason to get really upset, but sometimes body work and the costs are more then what it normally turns out to be. I know most places in my area won't touch a car like these for under 15k to start.
Reply With Quote
  #5  
Old 05-24-2006, 11:10 AM
4mm 4mm is offline
Supporting Member
 
Join Date: Feb 2005
Location: South TX
Posts: 926
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Look at the car very closely for any imperfections and if any are present, insist to have them addressed and fixed. Next, since he is negotiating with you based on the original deal, you can also do that with him in a professional manner. Negotiate for him to accept less than what he is asking, address any imperfections, and THIS TIME GET IT IN WRITING.

BTW, the paint job looks very nice. I would pay that kind of money if I knew I was getting a killer job.
Reply With Quote
  #6  
Old 05-30-2006, 10:31 PM
Jerebus67 Jerebus67 is offline
Member
 
Join Date: Dec 2004
Posts: 96
Thanks: 0
Thanked 0 Times in 0 Posts
Default

ok well it is almost done but i am sick to my stomach about the quality of the job. There are some imperfections in the paint. You can see the sand marks on top of the quarters. Now what to do. I am so sick of waiting for it to be done. The guy is so slowwwww.

So I have paid 13K for the job, it is not perfect. About 5 different spots were there are little imperfections in the paint. The sand marks really are noticible on top of the quarters. What to do??

I asked him before hand if he was comfortable painting it black and he said he was. Is it just that hard painting a black car without imperfections?
__________________
My 67 Convertible!
ZZ4, DSE front rear and minitub

http://photobucket.com/albums/e143/jerebus67/?sc=1
Reply With Quote
  #7  
Old 05-30-2006, 11:21 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,872
Thanks: 5,287
Thanked 1,568 Times in 697 Posts
Default

Paint shrinks up and most times if he has enough clear on it the sanding marks can be color-sanded and buffed out. I would make him do it though so if it goes through the clear to remove them it's on him.


Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #8  
Old 05-31-2006, 08:50 AM
J2SpeedandCustom J2SpeedandCustom is offline
Senior Member
 
Join Date: Sep 2005
Posts: 855
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Stick to your guns and make him fix the things that you don't like.

A suggestion would be to walk around the car with him and mark all the area's with tape that need attention. Give him a timeframe to fix them, meet and review once completed.
__________________
Jeff Allen
J2 Speed and Custom
Reply With Quote
  #9  
Old 06-07-2006, 02:42 PM
TonyG TonyG is offline
Senior Member
 
Join Date: Jan 2006
Location: Longview, TX
Posts: 253
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Don't worry about 13K if it is done right.. I have a friend who is doing a 64 GTO Convertible and when it is done it will be in excess of 25K.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net