69 Camaro - Lambo! - Lateral-g Forums

**califconstruct** · #1 09-02-2013, 07:43 AM

Nice ride.. love the color.

RBuhr69 · #2 09-02-2013, 12:09 PM

Front end is all button'd up.....Start on rear end tomorrow!

Smitty68 · #3 09-02-2013, 04:33 PM

Keep up the good work, and keep the pics coming! Thanks again for all the info you provided.

RBuhr69 · #4 09-07-2013, 04:29 PM

Well another day closer to getting it back on the road....Got all the Ridetech rear end suspension all bolted up, but ran into to a left/right centering up the rear end issue....There is no way to move the rear end left/right without re-welding the axle tube brackets.....

Anyone know of another way?

Rick D · #5 09-07-2013, 05:50 PM

So are you saying the rear end isn't centered and is off set to side?? If that is the case I would first make sure it's not the body of the car?

RBuhr69 · #6 09-07-2013, 06:07 PM

Correct, the LR tire has 1 1/2 clearance from the inside the tire to the inner fender well, the Right side sits against the inner fender well.....

Rick D · #7 09-07-2013, 06:21 PM

Is it your org rear end or did you change it out? If I remember correctly you only add the upper brackets to rear housing? I would start by taking some measurements on the car and the housing. If its your org housing then the lower brackets have not moved?? So the housing should still be centered? Did you double check the wheels? I'm sure their correct but stuff happens?

What all has been changed in the rear?