Ridetch 4 link

[Richio1]

Originally Posted by marolf101x

You use the upper control arms to move the rear end side-to-side.

Yeah that should do it. When we first installed mine it was off too. Adjusting the length of the upper bars fixed it. Just play with it, adjusting one in and the other out will move it side to side.

I bought one of Prodigy's Moser 4 link rear ends. The pinion angle was off so instead of cutting off and rewelding all the brackets on thear end we installed adjustable rod ends on the lower bars too which gave use even more adjustability.

[Vegas69]

If your pinion angle is on the money, adjust one upper only to move the rear end side to side. This will keep your pinion angle in check.

[RBuhr69]

Awesome, thanks for the feedback..going to regroup this morning and see how it turns out....

[RBuhr69]

False alarm..Just got in a hurry yesterday and wasn't checking everything....Got it all lined up this morning and ready to weld tabs..Wheeewww!!!! Had me cared there for a minute..

[Bryce]

Originally Posted by RBuhr69

False alarm..Just got in a hurry yesterday and wasn't checking everything....Got it all lined up this morning and ready to weld tabs..Wheeewww!!!! Had me cared there for a minute..

good news!