66 Chevelle LSA/4L90E Conversion

[kwhizz]

Originally Posted by GregWeld

Wow you've been a mighty busy boy Ken! Looking good! I like the brushed look on the inlet tube.

Did I ever tell you I hate wiring? LOL I've spent DAYS making it all just go away... UGH! The stuff just is... Well I can't even think of any comparison right now that wouldn't get me tossed off here.

[kwhizz]

I got the Fuel Pump controller (Vaporworx) all installed and finish wired............It needed to be near the Battery so I made a bracket to mount the module inside the fender right there........worked out pretty good........I was also going to make the mount for the Mass Airflow sensor and after stopping at Frame-up Wheelworks.....Donnie told me that GM has them already made and ready for welding......and he just happened to have one......Lucky!!!!......

[waynieZ]

Very Nice!

[mufflerguy]

Originally Posted by kwhizz

I got the Fuel Pump controller (Vaporworx) all installed and finish wired............It needed to be near the Battery so I made a bracket to mount the module inside the fender right there........worked out pretty good........I was also going to make the mount for the Mass Airflow sensor and after stopping at Frame-up Wheelworks.....Donnie told me that GM has them already made and ready for welding......and he just happened to have one......Lucky!!!!......

Whats the GM part number for this? Thanks.

[kwhizz]

Originally Posted by mufflerguy

Whats the GM part number for this? Thanks.

Here you go #19166574

[mufflerguy]

Thank you sir. Beautiful work btw.

[Musclerodz]

make sure you weld it on or put a gasket under it. I have had them leak and cause tuning issues giving erratic a/f maps

[kwhizz]

I got back on the project today and finished the inlet tube with the Mass Airflow sensor mount.....Test fit and ready to go.....I just need to add a fitting for the valve covers venting into the tube.......I'll do that tomorrow and another thing off the list....

[kwhizz]

Got the air intake tube finished up today........After looking at the way that GM engineered the fitting that connected to the valve cover vents to the inlet tube........It seemed to me it was like a mini chamber so any residual anything would go to the bottom of the vessel......so......I made a mini version out of aluminum for the Vapor to flow thru, I probably made it more complicated than it needed to be ......but.......What's new.....LOL....

[kwhizz]

Well..........Can't put it off any longer......I bought an American Autowire Classic kit....Nice kit but they provide for every conceivable option and variable......so....I have probably 1/2 the wires that aren't going to be used ,.....so.....I have to sort all that stuff out.....First picture is what I started with this AM............the other pic is later in the day.....should have it pretty much sorted out and neatened up in a couple more hours......,.So far.....everything works like it should........LOL