Great catch!!! What rpm were you turning before shifting? Glad this turned out to your good. It's hard, if not impossible, to lose a dry sump belt at speed, and not pick up a bearing.
Great catch!!! What rpm were you turning before shifting? Glad this turned out to your good. It's hard, if not impossible, to lose a dry sump belt at speed, and not pick up a bearing.
Thanks... according to the GPS, I was running 94 mph. Third gear at 94 mph calculates out to 6,500 rpm. As soon as the light came on I let off the gas... slipped it in neutral, and turned the engine off. The early warning saved my engine for sure.
__________________
"If you wait, all that happens is you get older"
Mario Andretti
69 Camaro-Nutter Racing Engines/427CI LS2 sleeved/LS7 CNC ported heads/Custom cam/T&D 1.8 rockers/Manley crank/Manley H-beam rods/Weisco pistons/NRC Pro Series dry sump/Kooks/NA,92 octane,11.5:1- 672HP @ 6,900RPM, 566TQ @ 5,500RPM Build Thread- http://ls1tech.com/forums/generation...ine-build.html
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
