Unless you are doing a significant amount of custom fabrication, our shocks will not work with the oem lower control arm. Not enough vertical room on that suspension. How did you end up with that combination?
__________________
Bret Voelkel
President
RideTech
Air Ride Technologies, Inc.
Last edited by bret; 09-22-2013 at 07:25 PM.
Reason: Spelling
Drilled out the lower nuts to a 3/8 hole and used 5/16-18 x 1 1/2" bolts and lock nuts.
@ Bret: I got these directly from Ridtech when I reedeemed my
Ridetech Renegade award. No issues with assembly since I mounted them on the top side of the a-arm. I could see that they would not fit if one tried to mount them on the underside similar to the stock shock.
Looking forward to testing and tuning these sweet coilovers!
I can already tell a marked improvement over the stock shocks and 2" dropped springs I just removed.
__________________ Josh
Designing a '65 Chevelle with a StreetFighter theme, inspired by JP's II Much & Ron Schwarz's $5k Mustang
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
