I do a lot of stuff for local people. Usually design it in Solidworks then machine it or make it from sheet metal. Here is one I just finished. Its actually for myself. I am installing a 4 cam all aluminum V8 Lexus engine in my Nova. Lexus never made one with a manual transmission. So I machined an adapter from 6061-T6.
Gaslight, we live for this stuff! please start a build thread or post your links to another site. That build will be unusually fantastic!! Or just some basic pics...Mike
My go to machinist who is also a tool and die maker has been fabricating and machining many of the parts on this scratch built Miller race car a local prewar die hard is building. Using copies of the original Miller drawings they are duplicating the car as close to possible as to how miller himself may have built this car that never existed. I think the engine and the wheel hubs are about the only original pieces used as seen in the pics. Any cast parts needed are being cast and machined. The only one I have a pic of is the raw transmission case. It is truly a work of art.
__________________
Mike Redpath
Musclerodz & Customz facebook page
Congradulations on truly mastering this type of metal work.
It is just beautiful.
Regards,
Ty O'Neal
__________________
Project, "EnGULFed"
1964 Gulf Liveried, Corvette, "Grand Sport"
===========================
Ty O'Neal
"She Devil" aka. Betty
1969/70 Camaro SS
427 LS3, 600
Keisler Road and Track T-56
Full size 3 link and custom roll cage
315mm tires on rear, should fit the same on front. Worked to design a more effective shape.
======================
"Chester's '65"
1965 Buick Riviera
Aiming for true PT Status with
the best available from the 70's and 80's
======================
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Linear Mode
