2013 Shelby Brembo brakes - Lateral-g Forums

1Bad68Cat · #1 09-05-2013, 08:09 PM

Hi. I will be installing 2013 Shelby Brembo brakes on my 67 Cougar, but need a couple of dimensions. Does anyone have the dimensions in the picture below for the s197 generation mustang? I need the bolt circle dimension (front view) and the offset from the hub (right view). Thanks in advanced.

Robert

1Bad68Cat · #2 09-11-2013, 11:18 PM

Bump. Hopefully someone might have these dimensions. Trying not to purchase a spindle/hub assembly.

1Bad68Cat · #3 09-23-2013, 08:51 PM

Just a little update of the bracket I came up with.

**Revved** · #4 09-23-2013, 11:12 PM

Have you tried contacting Brembo to see if they already have a bracket for your setup?

I've done several Baer/Shelby setups on 67 Mustangs and your bracket looks awfully familiar.... really just going to be a few .001 here and there depending on the caliper mounting. Let me know if you need any measurements against parts I have sitting here.

1Bad68Cat · #5 09-25-2013, 09:21 AM

Quote:

Originally Posted by Revved

Have you tried contacting Brembo to see if they already have a bracket for your setup?

I've done several Baer/Shelby setups on 67 Mustangs and your bracket looks awfully familiar.... really just going to be a few .001 here and there depending on the caliper mounting. Let me know if you need any measurements against parts I have sitting here.

I have not contacted brembo, but when I had looked at there website, they did not list any disc brake kits for fords older than 1994. I also didn't think they would offer a bracket to bolt the Shelby 6 pot calipers to the wilwood pro spindle I am using since there are so many different variations/setups.

As for the measurements, do you have the ones I asked in the initial post? I plan on purchasing a s197 mustang spindle to confirm the dimensions I got when I mocked the brake setup at home.

1Bad68Cat · #6 10-27-2013, 01:17 AM

For anyone still interested. Now to the next problem, WHEELS!

**4mm** · #7 10-27-2013, 10:58 AM

Very nice, would the brackets also work on a 70 Mustang?

1Bad68Cat · #8 10-28-2013, 07:39 PM

Quote:

Originally Posted by 4mm

Very nice, would the brackets also work on a 70 Mustang?

If the 70 mustang is using Wilwood Pro-Spindles. If using stock drum brake spindles, Mustang Steve has brackets for them

70 tt rustang · #9 10-28-2013, 08:52 PM

I was also interested in doing the same setup on my 70. Is there a bracket also available for my ssbc setup?

1Bad68Cat · #10 10-29-2013, 07:04 PM

Quote:

Originally Posted by 70 tt rustang

I was also interested in doing the same setup on my 70. Is there a bracket also available for my ssbc setup?

What setup are you referring to? Wilwood pro-spindle with SSBC brakes or 2013 shelby brembos with a stock 70 mustang spindle?