This is MY 67 Camaro

[waynieZ]

The car should be awesome on Scotts frame.

[Steve68]

Hey Chief, Talked to the guys at Rick's prolly 10-15 yrs ago, they told me,

"we had talked to some guys that worked at GM building Camaros in the 60's, if they didn't go together with less than a gallon of bondo or have to beat the sail panel area with a rubber mallet to get everything to fit it, was not a normal car,

I know my car looked like someone beat it with a ballpeen hammer in the seem on the passenger side, Now, how true is all of this, I'm not sure,

oh yea, I have a SMD subframe too, very nice, building my building right now, so I can work on my car sometime soon,

and stay warm!!! Nice work,

I don't have a thread here or the P-T board, I'm not worthy, but I have one at LStech in the conversion thread,

[Sonar Chief]

Originally Posted by coolwelder62

No, as long they will fit an 1.5 hole in the frame.

So any vendors subframe bushing will work? Cool ....

Originally Posted by waynieZ

The car should be awesome on Scotts frame.

Ya know, that's exactly what I said ....

Originally Posted by Steve68

Hey Chief, Talked to the guys at Rick's prolly 10-15 yrs ago, they told me,

"we had talked to some guys that worked at GM building Camaros in the 60's, if they didn't go together with less than a gallon of bondo or have to beat the sail panel area with a rubber mallet to get everything to fit it, was not a normal car,

I know my car looked like someone beat it with a ballpeen hammer in the seem on the passenger side, Now, how true is all of this, I'm not sure,

oh yea, I have a SMD subframe too, very nice, building my building right now, so I can work on my car sometime soon,

and stay warm!!! Nice work,

I don't have a thread here or the P-T board, I'm not worthy, but I have one at LStech in the conversion thread,

How long til it's complete? Get back on the car soon I read some of your posts over at LS1Tech, pretty cool!

[Roberts68]

Dang Chief, NICE self present... Or present to the Camaro if you rather. congratulations!