Ls7 block

[Ppd1979]

How much would you for a ls7 mock up block.
Has 2 holes in it and has crank and 7 pistons.
Don't want too low ball the guy, too much.

[coolwelder62]

Originally Posted by Ppd1979

How much would you for a ls7 mock up block.
Has 2 holes in it and has crank and 7 pistons.
Don't want too low ball the guy, too much.

I just bought a complete 2011 LS7 long block that only needs 1 piston and new bearings and rings for $1200.00.

[214Chevy]

Hard to gauge. Some used LS7 blocks, with cracked cylinder walls, are still going for anywhere from $800-$1000. Cracked cylinder walls are all too common for LS7 blocks. I would say the average is about $1000 though. But, with two holes in it, I'd have to start on the low end.....$800-$900.

[Vince@Meanstreets]

Originally Posted by Ppd1979

How much would you for a ls7 mock up block.
Has 2 holes in it and has crank and 7 pistons.
Don't want too low ball the guy, too much.

what is he asking?
If its more than $425, pass, you can always buy a P-ayr mock up engine for that.