2004 GTO project - Page 2 - Lateral-g Forums

Windsor GTO · #1 02-03-2014, 04:41 PM

Windsor GTO · #2 02-03-2014, 04:43 PM

Gauges were purchased here on Lateral G parts sale area...

Windsor GTO · #3 02-04-2014, 04:29 PM

Finishing the cage welds.

Windsor GTO · #4 02-05-2014, 06:13 PM

the cage is almost finished being welded up. Roof X-brace and dash bar was cut notched and tacked in. Front thru the firewall bars will be mocked up this weekend. Once that is welded the rear frame rails will be cut out and the 4 link brackets will be welded in. looking to sheet metal in the trunk back seat area in a week or so. I will get more pics in a couple days.

wrp · #5 03-14-2014, 05:55 AM

Fabulous build

Windsor GTO · #6 02-07-2014, 08:33 AM

Placed the drivers seat in yetserday and did a test fit of cage. Fit was great. The front bars to tie sub frame to cage is being finished today then the x bracing under the floor will be done. I will try to get pics this wekkend.

Windsor GTO · #7 02-08-2014, 11:29 AM

Cage is almost complete rear suspension will be finished this week.

Windsor GTO · #8 02-10-2014, 08:59 AM

Should have the rear suspension done this week.

Windsor GTO · #9 02-15-2014, 02:56 PM

So I scored a nice deal on rear tires and wheels. BUT, looks like I need to narrow the rear a little bit....

Windsor GTO · #10 02-16-2014, 04:57 PM

Well close to finalizing the rear. looks like another 1and1/2 inches off each side will place the wheels in nicely.