Forgeline GX3 Finished in "Fury Green"

[214Chevy]

Originally Posted by Forgeline Wheel

This customer's wife ordered them as a surprise present

Does she have a sister. That's what I'm talking about baby!

[Forgeline Wheel]

Originally Posted by Jerry ss 396

The GX3's are on the top of my list , but I am having a hard time pulling the trigger. I want the stepped lip , brushed center ,with the HTM machining done and also polished outer hoops..
The problem is ,I'm not sure how that combination will look !
Is there a way this can be made for a pic ? Or some type or rendering ?

OK I've been digging through my image files to see what I can find.

I found this shot of the GX3 with a Brushed center (and Titanium outer).


Here is the DS3 with the Brushed/HTM combo and the Polished outer.


And I found this closeup of the Brushed/HTM combo on the ZX3P.

[Jerry ss 396]

WOW , Mark the DS3 is beautiful ! So now you have me really up in the air. Any pics of that exact wheel on a car ? I'm building a silver second gen camaro.

[Forgeline Wheel]

Originally Posted by Jerry ss 396

WOW , Mark the DS3 is beautiful ! So now you have me really up in the air. Any pics of that exact wheel on a car ? I'm building a silver second gen camaro.

I'm really not trying to make your decision harder. I just wanted to show an example of your Brushed/HTM finish.

I think that the Brushed/HTM DS3 was one of the many combinations on Steve Rupp's "Bad Penny" first gen.

[Jerry ss 396]

Believe me , I know your not trying to confuse me.
I looked on your website at both wheels. It seems the issue I'm having is not with the rears, a 19x12 with a 5.5 backspace will have that tough look that I'm after, but the front wheel on a second gen camaro doesn't leave much of a outer lip (18x9) 5.5 backspace.
I'm having a hard time putting a pic with that dimension wheel on the car. I'll keep searching ! Any additional pics will be greatly appreciated. Jerry.

[Forgeline Wheel]

Originally Posted by Jerry ss 396

Believe me , I know your not trying to confuse me.

I know. I was just being silly.

Originally Posted by Jerry ss 396

the front wheel on a second gen camaro doesn't leave much of a outer lip (18x9) 5.5 backspace. I'm having a hard time putting a pic with that dimension wheel on the car. I'll keep searching ! Any additional pics will be greatly appreciated. Jerry.

I've got a shot of a 18x10 DS3 on the front of Bill Goldberg's second gen TA. But why don't you PM me here at the forum or email me and we can discuss your fitments specifics in a little more detail.

Thanks!

[Jerry ss 396]

Originally Posted by Forgeline Wheel

I know. I was just being silly.



I've got a shot of a 18x10 DS3 on the front of Bill Goldberg's second gen TA. But why don't you PM me here at the forum or email me and we can discuss your fitments specifics in a little more detail.

Thanks!

I'm in Mexico , call you next week.