What engine are you going to use?

[barrrf]

LM7 with either twins or a decent single. Im still researching why 1 vs the other.........haven't made up my mind yet.

[will69camaro]

LSX427, 6 bolt heads, Fast 102R Intake, twin GT35R's. Should make 4 digit hp no issue.

[CamaroMike]

Anyone throw an LT4 in a pro touring car yet?

[Twoblackmarks...]

In the future this poll would have changed SBC to "gasoline engine" or maybe "internal combustion engine".... HeHe.. And the others would be "lipo" "AA" "Parallel wired 9volt" "Duracell" or whatever is hot in the Electric world now..

There is a lot of Electric cars here in my country now....

I have a Pontiac With a Pontiac in it, Round port exhaust Alu heads and Roller Cam. A Holley on the top too

[Jerseyboy]

Mopar Aluminum Gen III Hemi block bored and stroked to 440 inches (4.140x4.080), 9.5:1 compression, Ported 6.4L Apache Heads, Ported 6.1L Intake Manifold and a pair of Precision Turbo 6266 Turbos. Back it up with a built A580 5 speed auto trans from the SRT cars. Plan is to run about 12psi on pump gas and 18-20 on Q16. Should be around 800rwhp on pump and 1150-1200RWHP on Race gas. Plan is to be mostly a pump gas street car but I may run it in the Modern Street Hemi Shootout series from time to time just for giggles.

J

[DavidBoren]

Well that just sounds like fun! Pictures

[trevor572]

Only the ZZ 572 I bought myself for Christmas at this stage, I will have to wait until I get the car going again and see what loose change I have left for mods.