1968 Camaro "Badmotorfinger" v2.2

[Ron Sutton]

Originally Posted by 67zo6Camaro

Not bad, much lighter than I expected in this trim. Final weight should be under 3200lbs.



Current weight without front fenders, fiberglass hood, radiator and core support, and the interior seats.

Front weight is 48.5% of total. After adding fuel in the rear and then installing the front sheet metal and radiator, this number will improve closer to that magical 50% goal.

Back right rear... coilover and sway bar can be adjusted to lower the 703 corner weight. And the same can be done for the left front 668 corner weight to balance out the side to side numbers.

Brett

Bret, are these scale numbers with or without Dave in the car?