jydracing 63 Split Window

[taxidermy man]

Nice

[214Chevy]

Originally Posted by jydracing

.... and 20 x 18 rear

Wow!!!!!!!

[jydracing]

Vince, No It is not a Mock frame but it does have a lot of Scott's (VRP) innovation's built it to it. I have known Scott for over 30 years and he has help me build several projects. From a 2000 F-450 make over, a 48 foot gooseneck trailer, 190 inch front engine dragster, he has helped me out a lot. I have seen the cars he has built, and the one he helped his son Kevin build,,,,they are all fast.....and on a budget.....Hoping some of that VRP
magic, safety and engineering rubs off on this build, I know Scott at VRP will not steer me wrong!!!!

[coolwelder62]

Originally Posted by jydracing

Vince, No It is not a Mock frame but it does have a lot of Scott's (VRP) innovation's built it to it. I have known Scott for over 30 years and he has help me build several projects. From a 2000 F-450 make over, a 48 foot gooseneck trailer, 190 inch front engine dragster, he has helped me out a lot. I have seen the cars he has built, and the one he helped his son Kevin build,,,,they are all fast.....and on a budget.....Hoping some of that VRP
magic, safety and engineering rubs off on this build, I know Scott at VRP will not steer me wrong!!!!

This was not a paid advertisement.!!!!!!!!!!

[jydracing]

Spent today setting the body on the frame to see if my frame design will fit the body,,,or vise versa..... I think I got lucky!!!!!!

[jydracing]

I decided to add a little more horse power to my project. I purchased a Harrop HH122 supercharger. It supercharger was set up for LS-6, so I decided to change it over to work on a LS-3. I also decided to update the supercharger while I had it apart.

[WSSix]

That's going to be a lot of fun!

[jydracing]

Had to take the supercharger apart, 1. separated the blower for the manifold, 2. take out the cooling radiators to clean and install new fittings, 3. Take all parts off of the superchargers, and replace, 4. take rotors out, check for damage, (none), 5. check for clearance, new bearings, put back together, check clearances again, 6. replace all external bearings, 7. replace all O-rings and seals, 8, put blower and manifold, (the new LS-3 manifold), back together,,,,,done

[tubbed69]

nice build,these cars look great as pro-touring cars

[jydracing]

Originally Posted by tubbed69

nice build,these cars look great as pro-touring cars

Thank you