good drop spindle recommendations?

[31069ss]

i have dse upper and lower arms and going to be installing the speed tech chicane kit with coil overs on my 69 nova . was wondering what drop spindles can i use it can't be ats ones due to i just bought a big brake kit for the car for the stock spindles ....im also going to run a unisteer rack and pinon . any help would be appreciated! thanks - Ryan

[Vince@Meanstreets]

Originally Posted by 31069ss

i have dse upper and lower arms and going to be installing the speed tech chicane kit with coil overs on my 69 nova . was wondering what drop spindles can i use it can't be ats ones due to i just bought a big brake kit for the car for the stock spindles ....im also going to run a unisteer rack and pinon . any help would be appreciated! thanks - Ryan

Since you don't want to use the ATS/SpeedTech AFX , I would recommend the RideTech spindle, Tru Turn and a Speed Tech 670 Delphi Lee box set up over the rack system. Its a great set up and to me feels better than any rack kit available now.

[Blake Foster]

You shouldn't need a drop spindle at all. just run the stock one you will be able to get the ride height where you want it.

[31069ss]

Originally Posted by Vince@MSperfab

Since you don't want to use the ATS/SpeedTech AFX , I would recommend the RideTech spindle, Tru Turn and a Speed Tech 670 Delphi Lee box set up over the rack system. Its a great set up and to me feels better than any rack kit available now.

Where do i find the Delphi lee box set up at . I looked at speed techs website and didn't see anything

[Vince@Meanstreets]

I just looked at the site and there is just a picture of it.

Blake, are you still selling Lee's 670's?

[31069ss]

Originally Posted by Vince@MSperfab

I just looked at the site and there is just a picture of it.

Blake, are you still selling Lee's 670's?

I still don't see it ...... Maybe I'm looking in the wrong section ?

[31069ss]

Originally Posted by Vince@MSperfab

I just looked at the site and there is just a picture of it.

Blake, are you still selling Lee's 670's?

Never mind i finally found it ! Is it about the same size as the stick unit ? And have you guys has any header clearence issues when using it ?

[Blake Foster]

There is a HUGE supply problem from Delphi right now that is why we took it down, Lee is struggling to get NEW box Cores, they do not use old stuff and the supplier is not delivering so rather than have to make excuses we just took it off the site, wish it wasn't that way but these are old out of date parts and I suppose we are lucky they have been making them this long

[Vince@Meanstreets]

Originally Posted by Blake Foster

There is a HUGE supply problem from Delphi right now that is why we took it down, Lee is struggling to get NEW box Cores, they do not use old stuff and the supplier is not delivering so rather than have to make excuses we just took it off the site, wish it wasn't that way but these are old out of date parts and I suppose we are lucky they have been making them this long

Thanks,

They are great boxes.

[Vince@Meanstreets]

Originally Posted by 31069ss

Never mind i finally found it ! Is it about the same size as the stick unit ? And have you guys has any header clearance issues when using it ?

They are a bit smaller, about 6lbs lighter and fit all the headers we have used.

Available from
DSE http://www.detroitspeed.com/Steering...ring-gear.html
Global West part number ST-42 via Summit Racing http://www.summitracing.com/parts/gls-st42

Keith over at Custom Works http://www.customworksperformance.net/suspension.html