good drop spindle recommendations?

[31069ss]

Originally Posted by Vince@MSperfab

They are a bit smaller, about 6lbs lighter and fit all the headers we have used.

Available from
DSE http://www.detroitspeed.com/Steering...ring-gear.html
Global West part number ST-42 via Summit Racing http://www.summitracing.com/parts/gls-st42

Keith over at Custom Works http://www.customworksperformance.net/suspension.html

Are these the same boxes that speed tech also sells ? And i will be using hooker super comp headers ..... You think i will have clearance issues

[Vince@Meanstreets]

Originally Posted by 31069ss

Are these the same boxes that speed tech also sells ? And i will be using hooker super comp headers ..... You think i will have clearance issues

The ones that were available from ATS/SpeedTech were tuned by Lee steering. These are out of the box Delphi units. They work good.

[mdprovee]

Just a note......If you are using Hooker Super Comp headers, they will not work with the True Turn system.....Dynatech headers fit the True Turn System.

[Blake Foster]

ok now I'm lost you said at the beginning you were using a Rack but then we got onto steering boxes?

[Vince@Meanstreets]

Originally Posted by Blake Foster

ok now I'm lost you said at the beginning you were using a Rack but then we got onto steering boxes?

I turned him around and told him it wasn't necessary and recommended a 600 Delphi.

[Vince@Meanstreets]

Originally Posted by mdprovee

Just a note......If you are using Hooker Super Comp headers, they will not work with the True Turn system.....Dynatech headers fit the True Turn System.

Thanks Mike, I can't believe I forgot about that little item.