1968 DSTRYR Camaro

[ADiCarlo]

So it's been awhile since I updated but things have been moving... slowly.

To start we had a cut out panel on the driver rear window lucky enough Vince saved the day and was able to provide an OEM piece of just the cut out so I didn't have to buy the entire sail panel.

Here's the installed piece all lined up and pretty.



We also picked up a 22 gallon Fuel Safe fuel cell from Chris Gonzales over in Oxnard and are fitting the tank in the trunk. The goal is to have it not show from the lower valence for a clean look and to allow as much ground clearance when the car is staged for track use. Also the tank support will run from one rail to the other for added rigidity and bracing.

Starting with measurement of the tank and trunk we got our main box support



Clean tig welds:


threaded locks are added to attach the tank to the brace using the 20 + tank cover screws. This thing isn't going anywhere and is legal across all racing sanctions.



Setting the trunk fitment - it's going to be tight.



I'll update once we've got a final install.

AD