Chad's 68 Camaro V3.0 build. LS3 & TCI goodies

[efs69]

Nice looking adapter. I am not sure but I think Brett at Fab53 may be able to build it for you and he is in the LB area. Another option, if its not hard to take the pan off, would be to tig the fittings onto the pan that way you can set the angles up to work with your set up.

But honestly I would do the tune work first before going any further.

[Jr]

Chad,
Can you post a link to that thread on tech?

[Matt@BOS]

How about the Mocal thermostat that Improved Racing also sells? If there is space downward it might work for you.

http://www.improvedracing.com/cooler...ines-p-33.html

[Chad-1stGen]

Originally Posted by efs69

Nice looking adapter. I am not sure but I think Brett at Fab53 may be able to build it for you and he is in the LB area. Another option, if its not hard to take the pan off, would be to tig the fittings onto the pan that way you can set the angles up to work with your set up.

But honestly I would do the tune work first before going any further.

Well I'm going to do the tune but either way I'd like to run an oil cooler so that part of all of this is not effort wasted. I called Brett yesterday but he said he is too busy to do work like this. Otherwise I'm sure he could make the part.

Originally Posted by Jr

Chad,
Can you post a link to that thread on tech?

Sure, it is right here: http://ls1tech.com/forums/generation...r-options.html

Originally Posted by Matt.A

How about the Mocal thermostat that Improved Racing also sells? If there is space downward it might work for you.

http://www.improvedracing.com/cooler...ines-p-33.html

No I don't think the Mocal would work at least not if I don't want the lines next to the headers. I guess it would be mostly metal next to the header but both fittings would be up against or near the headers.





Because of the kick out of the pan I would love the custom adapter above. If I use the Champ or Canton adapter for steel pans that replaces the oil filter adapter the lines would have to run out alongside the kick out (where the Autokraft sticker is). Still farther from the headers than my current setup but not as ideal as being able to get them above the kick out tucked into the pan.

[Jr]

Did you come up with a fix for the oil cooler? Also, do you have a cage in the car?

[Chad-1stGen]

Originally Posted by Jr

Did you come up with a fix for the oil cooler? Also, do you have a cage in the car?

I've gathered up parts to make steel lines from the adapter to out past the headers. I'm having Rob from PCH Rods try and bend it up for me, hopefully next week. Its super tight so until we bend up the line I'm not 100% there is room to fit hard lines. I'm having to step down to -8 to do it too as the -10 bender has to large of a bend radius to work.

No cage in the car. I've got a 4 point in mind for a future upgrade.

[Chad-1stGen]

Couple of fun updates.

Super Chevy published some inital info on the 2014 Super Chevy Handling Challenge. My car was their reprsenting TCI enginnering's front Camaro subframe and rear 12bolt based torque arm.



http://www.superchevy.com/events/150...back-on-track/

I'm looking forward to the full articles. And I can't wait to go abuse my car on a full road course again. I'm eyeing the Extreme speed event at SOWS 11/15-16 if I can get my oil lines redone this weekend.

I also attended the NMCA West Hotchkis Autocross event this past weekend. this is first time I've had to really try out the car. My previous trips to Adam's have been rushed and mostly in the dark.

What a blast!! This car is so freeking fun to drive compared to my old setup! I now have to relearn the car because it can do things in a corner I've only been able to dream about before. I can't wait to learn more behind the wheel and also about shock tuning. It really helps that I can piggy back off of years of development Sal has put into his car.

Speaking of Sal. It made the event really fun to have both of our Torch Red 68 Camaros TCI equiped fighting it out. I've got more power but he's got more seat time and I think bigger cajones.



Sal set a faster lap time than me both Saturday and Sunday but I closed the gap Sunday and lost by only a tenth. I ran in a session before Sal so he knew the time he had to beat so it was a lot of fun watching him drive his ass off to make sure he beat me including a spectacular spin on his last run.

Here is another shot of my car in action.

EDIT: Need to resize this one.

In the classic Muscle class I finished 3rd Saturday and 4th Sunday.

Sunday had a better turn out in that class too. It was great catching up with and watching some of the other Lat-G members drive too. The format of the event using run groups with multiple laps per run group instead of cycling through all cars in order was awesome. Gave you time to make changes to the car, relax, chat with folks, etc.

So while the overall number of laps was lower than I liked (8 Saturday, 7 Sunday) I really enjoyed the event.

I didn't get great video as this was my first time using HLT at an autocross but will try and post some up later.