66' Road Race Mustang

[Vince@Meanstreets]

Originally Posted by dstryr

Brian


We should go halves on a flatbed trailer for when both our cars are done


*Cough* Vince *Cough*

[dstryr]

Originally Posted by Vince@MSperfab

Package will be there tomorrow........

[LS7 Z/28]

This is a sweet project dude, I wish there were more current build threads like this in this section. Did you find a jig or build table yet?

[358Mustang]

Originally Posted by Track Junky

I agree with Greg. Looks great. Hope this project doesn't take you to long......looking forward to seeing you at the track next season.

Thanks, I hope to get it done relatively soon. But we will see.....

Originally Posted by dstryr

Brian


We should go halves on a flatbed trailer for when both our cars are done


*Cough* Vince *Cough*

I've got an empty enclosed sitting in my driveway dude.. Hehe

Originally Posted by Flash68

Nice lookin plate.

So you decided to go with front and rear motor plates huh?

Thanks, and yeah I think so. I've heard of guys using a front plate and just a tranny mount. But that kind of scares me? I am doing some small two piece rear mounts. basically ears off the bellhousing to the chassis.

Originally Posted by Valve Lash

This is a sweet project dude, I wish there were more current build threads like this in this section. Did you find a jig or build table yet?

Thanks man. I may just do it old school and string line and plumb bob it.. I've got it leveled out right now. I may make a small fixture or something, haven't figured that out yet. I have suspension mocked up in cad, so in theory I should be able to make the arms and go from there.

[dstryr]

Originally Posted by 358Mustang

I've got an empty enclosed sitting in my driveway dude.. Hehe

Room for 2?

[Flash68]

Originally Posted by 358Mustang

Thanks, and yeah I think so. I've heard of guys using a front plate and just a tranny mount. But that kind of scares me? I am doing some small two piece rear mounts. basically ears off the bellhousing to the chassis.

I went through that same thought & research process and got enough feedback from way heavier hitters than myself that the mid plate was not necessary so I skipped that one. It certainly reduces some chassis flex there but is not in the least bit a necessity item.

I was also strongly advised to run a rubber trans mount with the motor plate instead of a solid trans mount. FYI

[358Mustang]

Originally Posted by dstryr

Room for 2?

2 cars or 2 trailers?? I could fit another trailer here sure. I am out of room for vehicles LOL.

Originally Posted by Flash68

I went through that same thought & research process and got enough feedback from way heavier hitters than myself that the mid plate was not necessary so I skipped that one. It certainly reduces some chassis flex there but is not in the least bit a necessity item.

I was also strongly advised to run a rubber trans mount with the motor plate instead of a solid trans mount. FYI

I was talking to a buddy who put a D3 headed roush motor in a mustang and he said the same thing. I kind of scratched my head, I wouldnt feel comfortable with it really.. If I'd have done that I would have used .750 instead of .5" plate for the front. Hell the drag guys use .250!! But that is with a front and rear plate.... Mine is fairly light with all the pocketing.


Once I actually get the engine totally mounted and done I can post some more pictures of it..

I cut one side of the rear motor plate tonight, I need to finish the cad for the other one and do that (why couldnt ford make the bellhousing symetrical??)

I need to order some more tubing so I can build the subframe... I really need a 1.25" die anyone have a pro-tools 105 die I can borrow??