This is MY 67 Camaro

[waynieZ]

It looks good Chief keep plugging away.

Originally Posted by coolwelder62

You can get the rear sway mount/support brackets tabs from Ridetech if you have an older air/bar setup.

Thanks

[SlowProgress]

Man this project is really moving along. You have a better work ethic than I do !

[Sonar Chief]

Originally Posted by SlowProgress

Man this project is really moving along. You have a better work ethic than I do !

I am between school semesters and had to move quick to get things going .... school started yesterday so things will slow down some.

Originally Posted by waynieZ

It looks good Chief keep plugging away.

Thanks

Picked up the 4L60E on Friday and got her cleaned up a little .... at least its respectable to put under the car now! My roll bar came in ... looks good too! What I liked was Wild Rides already fish mouthed the bars and was fitted to a 67 Camaro, I just need to trim the height of the main hoop and trim the trunk bars; still contemplating the harness bar ... WELD IN or REMOVABLE, Wild Rides just tacked it in place.



Cleaned up the 4L60E!

Roll bar is 1 3/4 .120 DOM!

Fish mouthed and test fit in a 67 Camaro .... NICE!

Not much of an update ..... school started and I will be preoccupied for awhile, need to get the tranny and engine together and get the rear end set.

More to come, thanks for looking ....

[waynieZ]

Sweet! good reference points.

[coolwelder62]

Michael, I have an extra set of Ride Tech weld on lower mount's I will trade you for your bolt on if needed.

[Sonar Chief]

Originally Posted by coolwelder62

Michael, I have an extra set of Ride Tech weld on lower mount's I will trade you for your bolt on if needed.

PM sent, thanks.

[SilverSS1969]

Does anyone have pictures of the weld on lowers for ride tech? I though the kit was bolt on, didnt know they had an option for weld on too?