LS Adapter Plates .....Be Careful!

[aany001]

I did run into this. Corrected a few of my issues.

[IMPALA MAN]

Originally Posted by IndyNova

I tried flipping my mounts over and it wouldn't sit down on the frame stand due to the ridge on the mount. Did u guys just cut that section off to get it to clear?

Just loosen one or both of the frame stands and it will move enough to gain you the gap you need.

[IndyNova]

Excellent! I will give it a try. Thank you

[snappytravis]

Originally Posted by IndyNova

I tried flipping my mounts over and it wouldn't sit down on the frame stand due to the ridge on the mount. Did u guys just cut that section off to get it to clear?

Yep, I know what your talking about. I had to cut the edge so it would mount would sit right.

[brandonc707]

Im going to go with your speed tech "kit" when i go with ls........
A couple questions Blake, first I see that you have a header that works with the tru-turn, will that header work with a mechanical clutch linkage? also wondering if you make a pan without the remote filter?

I personally like buying all my parts from one vendor, that way everything is designed to play nice with each other and all of the headaches have already been worked out.......... just my $.02

[Blake Foster]

Originally Posted by brandonc707

Im going to go with your speed tech "kit" when i go with ls........
A couple questions Blake, first I see that you have a header that works with the tru-turn, will that header work with a mechanical clutch linkage? also wondering if you make a pan without the remote filter?

I personally like buying all my parts from one vendor, that way everything is designed to play nice with each other and all of the headaches have already been worked out.......... just my $.02

I am almost positive they will work with the manual linkage, I KNOW the Big block one do so I am sure we made the LS one fit also.

we do not make a pan with out the remote filter. if you want to buy everything from one supplier we can sell the Autokraft pan as well.